60
Display setup interface is shown as below. See Figure 5-21.
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all your modification here only applies to
DVR local end. You need to open web or client end to refresh channel name.
Time display: You can select to display time or not when system is playback.
Car number display: You can select to display plate number or not when system is playback.
GPS display: System displays GPS information in the screen for your reference.
Please note
only the unit of GPS module supports this function.
Resolution: There are four options:
1280×1024, 1280×720, 1024×768,800×600(default).
Please note system needs to reboot to active current setup.
Enable tour: activate tour function.
Interval: Input proper interval value here. The value ranges from 5-120 seconds. In tour
process, you can use mouse click to use the switch function.
Stands for opening switch
function,
stands for closing switch function.
Motion tour type: System supports 1 window tour.
Alarm tour type: System supports 1 window tour.
Please highlight icon
to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-21
In Figure 5-21, click modify button after channel. You can see an interface is shown as in Figure
5-22. Please note all your modification here applies to local end only. You need to refresh web or
client-end to get the latest channel name. System max support 25-digital character.
Figure 5-22
