111
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type
The abnormal events include: no disk, no space, disk error, net error.
You need to draw a circle to enable this function.
Normal
Out
The corresponding alarm activation output channel when alarm occurs,
There are 7 channels.
Latch
The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
Send
email
If you enable this function, system can send out email to alarm the
specified user. Please note this function is null when net error occurs.
Alarm
upload
System can upload the alarm signal to the network (includes the alarm
centre.)
Show
message
System can display alarm information in local DVR screen.
SMS
Once you checked the box here, the device can send out the message
to the specified cell phone when alarm occurs. Please note this function
is null when net error occurs.
Buzzer
Once you checked the box here, the buzzer beeps when an alarm
occurs.
7.6.3.8 Vehicle Configuration
The vehicle configuration interface is shown as below. See Figure 7-51.
Please note only the unit of GPS module supports this function.
Figure 7-51 Vehicle Configuration
Please refer to the following sheet for detailed information.
