XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
7
/
55
DSEO0711-2-V211119/UXP8401-PG.CC.GE.AR-CD7003/5~+45
℃
Chapter 1 Safety Warning and Instructions
1
1.3 Caution
Pull the operating temperature of the equipment as close as possible to the ambient before
attempting to open the door or shut down the equipment.
The minimum distance away from the back of the equipment to the wall, furniture or other
installations shall be 300mm!
Reduce the frequency of door operating and keep the door opening as short as possible! It
takes time for the equipment to recover the Temperature and temperature distribution! The
temperature difference may result in condensing and dripping of the specimen!
Caution: Risk of biological and chemical hazards!
When hazardous substance may be exhausted in the air by exhaust opening or operating of
the door or, drained through liquid connections or drain device for condensate:
a)
hazard exists if the equipment is used to heat, cool and condition specimen containing or
treated with toxic chemicals or hazardous microorganisms;
b)
hazard arises if the specimen within the equipment should be treated at periodic or
aperiodic intervals, with toxic chemicals or hazardous microorganisms;
c)
hazard develops if specimen liberates hazardous substance under refrigerated and
heating conditions with or without additive humidity.
Caution: Hazard of strong optical radiation!
Lamp canopies incorporated either at both sides, or within the cabinets generate strong visual
radiation which could cause a hazard. Use special care when trying to get access to the cabinet
interior:
a)
Use glass ware or equivalent PPE as appropriate;
b)
Check functionality of dimming capability of the lamp canopies once door opened, and
confirm that the light intensity within safe limit;
c)
Access to the side lamp canopies only the well-trained personnel and with appropriate
PPE against optical radiation, electric shock and burn hazard
；
d)
Never disable the dimming sensor for safe light intensity.
