XTEMP ENVIRONMENTS (SHANGHAI) CO., LTD.
http://www.xtemp-usa.com/
37
/
55
DSEO0711-2-V211119/UXP8401-PG.CC.GE.AR-CD7003/5~+45
℃
Chapter 3 Controller Descriptions and Operation
3
Tap Cycles for keypad pop up. Set the value for intended cycles and use [ENT] to
accept, or [CLR] to clear error or [ESC] to exit. Use [NO] to cancel a schedule plan and come
back to HOME; Use [YES] to initiate a Schedule Program operation as shown in Fig 32. Once
the schedule date and time arrives, the equipment will start program operation automatically.
3.13 Clear warning message
During normal operation of the equipment, the following event will trigger a warning message
and lead to interruption of the equipment operation, with event status message showed as
RED color. The warning message will not disappear even with the missing of the event cause
until processed by the operator.
Fig 32
[RESET] for more than 2 sec can be used for restart of the equipment after clearance of the
warning event. If any the root cause not removed, the warning message will pop up again in
about 5 sec. Refer to Fig 33.
[MUTE] can be used to disable and enable the operation of a buzzer.
[STOP] can be used to terminate the equipment operation as for normal termination.
Fig 33
