3.7.4
Going downstairs smoothly
When CT420 gets off the
edge of the platform totally
and goes down stably, cancel
automatic mode. If the base
of CT420 is unstable when
going downstairs, adjust to
rotating mode by handheld
controller. Adjust manually
loading board rotating angle
according to different cargo
gravity so that CT420 can go
downstairs stably. Then the
speed can be increased.
3.7.5
Going down to the last THREE steps
When CT420 goes
downstairs to the last three
stairs
，
automatic loading
board adjustment mode is
recommended, set speed to
1.
Turn to loading board
automatic adjustment mode by
handheld controller. If the
manual adjustment mode is
applied please make sure the
balance of the loading board
，
shift between the track walking
mode and manual adjustment
mode. And when the tracks
land on the floor, the floor walk
mode can be launched.
Summary of Contents for CT420
Page 1: ...www xsto net OPERATION MANUAL HEAVY LOAD POWERED STAIR CLIMBER CT420...
Page 34: ...Table 1 shows the categories of various fault warnings...
Page 35: ......
Page 36: ......
