3.6 Go Upstairs
3.6.1
Start the CT420 stair climber
For the first use, you need to
insert the plug under the battery
base. In the daily use since then,
there is no need to insert or to
remove the plug.
Insert the 24V battery pack and
turn on the battery switch.
Note: Before turning on
the battery switch, make sure
the battery is inserted in the
battery holder and the power
cord is connected well.
Turn on the handheld controller
switch; Click once to start the
controller screen display; click
again to shut it down.
Summary of Contents for CT420
Page 1: ...www xsto net OPERATION MANUAL HEAVY LOAD POWERED STAIR CLIMBER CT420...
Page 34: ...Table 1 shows the categories of various fault warnings...
Page 35: ......
Page 36: ......
