xsto CT420, Operation Manual

Page: 3 / 40

1 Symbols and safety instructions
WARNING ------ May cause serious injuries or death!
CAUTION ------ May cause slight injury!
NOTE ------ May cause machine damage!

Read the user’s manual and pay attention to the warning and
safety instructions before operation.

Check the electronic functions, battery capacity and crawler
tracks.

Store the CT420 in an environment above 0
℃
for at least
one hour before operation.

Read the technical parameters carefully. Do not exceed the
rated weight.

Only trained person can operate CT420. The operator should
be in health both physically and mentally.

When stair climber the machine is going up and down, other
personnel shall not stand under the machine .

Antiskid shoes are required. It must be operated with two
hands. Run the pilot operation without load and at low speed.

Make sure there are no obstacles on the stairs and the steps
are not slippery
。

Only for carriage of cargo, not for persons. Safety trap must
be used to secure the cargo.

Do not reach under the load plate or touch the rotating part
and track.

Do not use the CT420 in rainy, wet, snowy or icy condition
and sideslip or other potential dangers may be caused.

Do not use CT420 if the crawler track is broken.

Do not use CT420 on road that is slippery or with barrier.