3.4 Operate on Flat Ground
3.4.1
Operate on flat ground
The bottom of CT420 has casters
for walking on flat ground. Adjust
the loading board to the smallest
angle, which will enable the casters
touch the ground. And then the
operator can push the handle to
move CT420 forward on flat
ground. This way can be applied on
flat ground
ONLY
.
Warning
：
When the slope of
the ground is bigger than 5
°
, it
is forbidden to use the flat
ground model by using the
caster to move!
3.4.2
Track walks on flat ground
The CT420 can walk on flat ground
with crawler tracks. Switch to the
loading board manual operation
mode, raise the loading board to an
angle till the crawler tracks touch
the ground, and then the operator
can
move
the
machine
by
controlling the joystick.
This
way
is
applied
to
short
distance walk or on uneven road
surfaces.
Summary of Contents for CT420
Page 1: ...www xsto net OPERATION MANUAL HEAVY LOAD POWERED STAIR CLIMBER CT420...
Page 34: ...Table 1 shows the categories of various fault warnings...
Page 35: ......
Page 36: ......
