xsto CT420, Operation Manual

Page: 16 / 40

Mode 2: Under the automatic
adjustment mode of the loading
board, the state of Handheld
Controller is shown in the
picture, manually adjust the
turning angle of the loading
board to a proper angle by
operating the Joystick, then
release the rocker and keep the
angle. CT420 will memorize the
angle of the loading board
automatically.
3.5.3
The notes for angle adjustment of the loading board
(1)
Effective range of automatic angle adjustment: 7°to 30°
When CT420 is under automatic adjustment mode, if the horizontal angle of
the loading board is adjusted to less than 7°or more than 30°, CT420 will
automatically adjust the angle of the loading board to raise loading board to 7° or
lower the loading board to 30°.
When CT420 is in the manual mode, if the horizontal angle of the loading
board is adjusted between 7°and 30°and enters the automatic mode, CT420 will
automatically adjust the angle based on the current angle. If the loading board
enters the automatic mode with an angle greater than 30°, the loading board will
be depressed to 30°(In case of less than 7°, see the second precautions).
(2)
Restore the last used auto angle
When the CT420 switches to manual mode from automatic mode, CT420
will retain the horizontal included angle of loading board during mode switching
(assuming the angle is 15°).
When the CT420 is under manual adjustment mode and the horizontal
included angle of the loading board is less than 7°. Then switch to the automatic