xsto CT420, Operation Manual

Page: 24 / 40

NOTE: When the loading board angle is automatically
adjusted, the speed of going up and down the stairs will be
automatically reduced to ensure safe going up and down.
When the automatic balance adjustment is completed, the
original speed will be restored. Under the automatic
adjustment mode of the loading board, in the initial stage of
going upstairs, only the joystick needs to be controlled, and
no other operation is needed.
3.8 Turning operation on flat ground or platform
Press "M" key on the handheld controller to switch the
climbing machine to the loading board manual adjustment
mode. Operate the joystick to lift and flip the load board,
slightly increase the center of cargo’s gravity, until the
casters completely go off the ground. Then, press "M" key
again to switch to the track walk mode, and use the joystick
to turn left or right. When the steering is completed and
ready to go up or down the stairs, follow the previous
instructions for going up and down stairs.
In addition, when turning, you can control the turn
indicator as needed. Left / right turn indicator: press once,
the light flashes for 20 seconds, press it again to turn it off.
Left
Turn
Right
Turn