ForeSite Intelligent Surface System User Guide
Installation
XSENSOR Technology Corporation
22 of 46
1.
2.
3.
Connecting the Sensor
The USB extension cable connects the sensor to the ForeSite IS Display Terminal.
Plug the male end of the sensor USB connector into the female end of the USB extension cable.
If your system includes the USB-USB connector brace, slide it onto the two connected cable ends.
Insert the male end of the USB extension cable into the USB port on the Display Terminal. If your system
includes the USB adapter brace, align the end of the USB extension cable between the teeth on the
brace. Push the connector into the brace until it is fully inserted in the USB port.
