Manuel_X_232_EN
11 / 13
27.01.2016
Menu-Structure
Advices about Commands
Main Menu / Parameterization
By pressing UP/DOWN you can change the values of the parameters.
When the left decimal point is rapidly blinking, so a change has been made. The change will be automatically saved when
you leave the process of parameterization.
Important: During the parameterization you can restore the last saved value by pressing UP and DOWN at the same time.
(
→ s. paragraph “FAQ“)
60 seconds after the last key pressing, the device returns to the display mode. Any taken change will be saved.
Setup Menu
By pressing UP/DOWN you can change the values of the parameters.
10 seconds after the last key pressing, the device returns to the display mode. Any taken change will be saved.
Special Commands:
General Reset (deletes ALL preferences)
By simultaneously pressing UP and DOWN for 10 seconds.
Test Menu (see
“FAQ”)
By pressing DOWN for 10 seconds.
