2
www.XSscuba.com
XS Scuba Inspire Regulator Service Manual
Table of Contents
Introduction
2
Warnings, Cautions and Notes
2
Maintenance
Schedules
3
Standard
Procedures
3
Nitrox
Compatibility
3
Pre-Test & Inspection Prior to Disassembly
4
Required
Tools
4
Exploded Diagrams and Part Lists
6
1st Stage Disassembly Procedure
10
2nd Stage Disassembly Procedure
14
Introduction
This manual outlines manufacturer prescribed
servicing procedures for the regulator product
described within. It covers disassembly, cleaning,
inspection, reassembly, adjusting and testing of said
regulator product. This publication assumes that the
technician performing the service is experienced,
Document Change Notice (DCN)
Warnings, Cautions and Notes
Pay special attention to information provided in warnings, caution and notes that are accompanied by one of
these symbols:
WARNING indicates a procedure or situation that may result in serious injury or death
if instructions are not followed correctly
CAUTION indicates any situation or technique that will result in potential damage to the
product, or render the product unsafe if instructions are not followed correctly
NOTE is used to emphasize important points, tips or reminders
Cleaning
Procedures
19
Preparing and Inspecting Parts
19
Recommended Cleaners and Lubricants
20
1st Stage Reassembly Procedure
21
1st Stage Adjusting and Testing
26
2nd Stage Reassembly Procedure
28
2nd Stage Adjusting and Testing
33
Troubleshooting
Guides
35
Torque Specifications
37
Test Bench Specifications
37
Page #
Rev. Date
Revision Made
All
04/20/2017
First Release
20
12/18/2017
Source for Christo-lube MCG111 changed
mechanically inclined, is using the proper tools,
parts and procedures prescribed within. If you do
not fully understand all of the procedures outlined
in this manual, contact XS Scuba and speak with a
Technical Advisor before proceeding any further.
