User's Manual
page 7
Wag Base Unit (
Rear Panel)
Wag Charger
With the charger lid open, the ring is inserted straight down from overhead with the ring lid
facing toward the front of the charger. A blue led will illuminate the ring lid if installed properly
and charging is in progress. A green led will light at the front of the charger behind the charger
lid snap.
Table 3. Base Unit Rear Panel Components
#
Item
Description
1
Rear Panel
Here is where you connect your effects gear and the receive antenna.
2
Antenna
Receives the wireless transmission from the Ring.
3
MIDI OUT
Connect this port to effects units that accept MIDI input for effects control.
4
EXP OUT
Connect a 1/4" stereo (Tip, Ring, Sleeve (TRS) or Mono (TS) cable to effects units that accept an
expression pedal input. See compatibility table.
5
PWR
AC power adapter connection. Use only the power supply shipped with the product.
