User's Manual
page 21
SW Sens
This stands for Switch Sensitivity. For CC switch modes and Program Changes, this controls
how sensitive the switching is. With a lower sensitivity you will be less prone to accidental
switching but won’t be able to toggle effects as rapidly.
PrgMode
This stands for Program Change Mode. Midi Program Changes are used to switch effects patches
on multi-effect units. The valid settings are :
Off – Disable Program Change Messages
FwdMom – Momentary switching of patches in the forward direction.
RevMom – Momentary switching of patches in the reversed direction.
FwdLatch – Latch Switching of patches in the forward direction.
RevLatch – Latch Switching of patches in the reversed direction.
See chapter 4 “Using the Wag to Switch Effects” for a description of momentary and latch
switches.
ProgChg1 and PrgChg2
These set the Program Change numbers (000 – 127) which select two effects patches to switch
between. Note: Some effects units start counting Patches with 000 and others with 001.
NAME
Here is where you can name the Wag Base Unit Patch something meaningful (8 characters max).
Radio Ch
Here is where you change the radio channel (1-4) if you are getting radio interference.
