User's Manual
page 17
Chapter 4.
Configuring the
Base Unit
The tutorials at the beginning of this manual gave you an idea of what you can do with the
WAG
.
Further, the factory presets provide a great way to jump in and get started using it. However,
while the
WAG
is simple and intuitive to use, there is more to learn, in order to use it to your best
advantage. Read this chapter to learn how to do the following:
Select a Patch
Edit a Patch Parameter
Copy/Save a Patch
For the following sections, refer to this figure of the front panel of the
WAG
Base Unit.
Load a Preset/Patch
For your convenience, the
WAG
Base Unit provides 20 patches for you to save your
configurations. The patches have been configured at the factory for a number of popular effects
units to help you get started. If you edit the patches and save them you will lose these settings.
See instructions below for restoring the Factory Patch settings.
If you have changed any of the current patch settings and not saved the patch they will be lost
when you switch patches.
Loading a Patch:
Instruction
Comments
1
Use the MENU +/- switches to navigate to the
PATCH view
In this position the current PATCH is displayed. You can select a
different PATCH with VALUE +/-
Use the Value +/- switches to select the desired
PATCH
