User's Manual
page 18
Save or Copy a Preset/Patch
You can save your edits to a Patch. You can also copy from one patch to another.
To save or copy a patch:
Instruction
Comments
1
Press the MENU + and VALUE
– together
This combination is labeled on the front panel
The word SURE? Will be displayed
To save to the same Patch number just press the
MENU + and VALUE
– together a second time
The word SAVING will be displayed briefly. If you press any other
switch combination you will exit the SAVE mode.
To copy the current patch settings to another
patch: use the VALUE +/- switches to select the
destination patch number.
The patch number will change on the display
Press the MENU + and VALUE
– together
A second time to complete the save
The word SAVING will be displayed briefly. If you press any other
switch combination you will exit the SAVE mode.
Restoring the Factory Patch Settings:
Instruction
Comments
2
Power down the Base Unit
Hold down MENU
– and VALUE + at the same
time while powering up the base unit
The Factory patches will be restored
Edit a Preset Parameter
Procedure 2. To select and change a menu item:
Instruction
Comments
1
Use the MENU +/- switches to navigate to the
desired parameter
Use the VALUE +/- switches to change the value
of the parameter
The Value dial cycles through the available values for the selected
parameter. As you rest on a value, it will take effect immediately
