User's Manual
page 8
Quick Start Tutorials
We strongly recommend that you read and understand this entire manual to get the most out of
the
WAG
. However, the short tutorials in this section may get you going more quickly if your
effects gear matches one of the Presets we have configured for popular gear.
Tutorial 1 – General Flow
Instruction
Comments
1
Charge the Ring.
a. Connect the AC adapter cord into the PWR jack of
Charger, and plug the transformer into a 110 VAC
power outlet.
b. Insert the ring into the charger and close the lid.
A blue led will illuminate the ring when the ring is installed
properly and the ring is charging. When the Green Led at the
front of the charger illuminates, the ring is fully charged and
ready for use.
2
Slip the Ring on the finger of your choice (Typically, the
3
rd
finger of your pick hand), adjust the band, and wait for
the ring to wake up (20 seconds max).
The ring goes to sleep with non use to save the battery. In
PATCH view, the cursor bar graph will move with hand
opening/closing. In RADIO CHAN view the word SIGNAL will
display if the Ring is transmitting.
3
Connect an effect pedal that you want to control with the
WAG
to the rear of the Base Unit.
Examples:
Connect PEDAL OUT to a compatible effects unit
’s
Expression Pedal Input.
Connect MIDI OUT to a
compatible effect unit’s Midi Input
jack.
4
Use the VALUE knob to select a preset that provides the
desired type of control.
See the Patch Reference
– Appendix C
5
START WAGGIN'!
