26
“Xplore Your World!”
RESPOND™ LT CROSS-OVER HARNESS INSTALLATION
To attach Respond™ LT Cross-Over harness:
1. Insert hook and loop fastener through plastic loop as shown in figure 70.1, then fasten around plastic
loop.
2. Pull harness across chair (figure 70.2) then insert buckle into receiver on cross support near the shoul-
der.
3. Pull on webbing tab to tighten (figure 70.3) Repeat for other side.
Fig. 70.1
Fig. 70.2
Fig. 70.3
Fig. 70.4
To adjust Respond™ LT Cross-Over harness:
1. Remove buckle from webbing on harness
2. Pass webbing through desired fabric loop to (figure 70.4) to adjust
length.
3. Reattach buckle to webbing on harness. Continue with normal use.
RESPOND™ LT LUMBAR SUPPORT & LOWER THORACIC SUPPORT
Attach Lower Thoracic or Lumbar Support with provided hook and
loop fasteners in the locations as shown in figures 71.1 and 71.2.
Figure 71.1: Lumbar Support
Figure 71.2: Lower Thoracic Support
