18
“Xplore Your World!”
K. FOOTBED ADJUSTMENT
Leg Drop
Angle
Standard
7– 14in.
90°
Adjust
7- 14 in.
75°,90°,105°
Dynamic
7- 12 in.
90°
Footbed
Choices
Figure 39
Figure 40
Figure 42
Figure 43
Figure 41
A
B
Angle Adjustment
J.
ACTIVATOR™
Dynamic Seating (Optional)
1. To Unlock Dynamic Option, Verify that the wheel
locks are engaged.. While supporting the child’s
weight by keeping your upper hand on handle bar,
push down on the control knob with your foot until it
“clicks” into place. (fig. 37)
2. To lock the chair into static position, release the
lever by pulling it up with your foot. (fig. 38)
Figure 37
Figure 38
Knob has been pushed up to
the static (locked) position.
“CLICK”
2
ADJUSTING THE BACK ANGLE (RECLINE) (standard):
1. Lift kickstand (if equipped) until brakes are fully engaged. If kickstand is not equipped, engage
each brake separately by lifting handle until brake engages.
2. Push down with foot on the Recline Adjust bar (fig. 36), use handle bar to pull seat back in to
recline position (fig. 35), then release Recline Adjust bar so it locks seat into recline position.
3. To release from recline and return to upright position, repeat steps 1 and 2, except push seat
back forward to upright position.
WARNING: WHEN RETURNING CHILD TO UPRIGHT POSI-
TION, BE CAREFUL NOT TO PUSH SEAT BACK TOO FAR FORWARD SO AS TO FOLD
CHILD IN CHAIR.
Figure 36
Standard
Angle Adjustable
Dynamic
C
FOOTBED ATTACHMENT & ADJUSTMENT
1. Insert provided screws through footbed (standard footbeds,
fig. 41), or through bracket (adjustable footbeds, fig. 40).
The Standard footbed can also be installed inverted by in-
serting screws through positions as shown in figure 42.
2. To adjust height of footbed, loosen each screw on both
sides of the footbed as shown in figure 44, then position
footbed as desired. Tighten screws.
3. To adjust angle of adjustable footbeds, pull tab (fig. 43), po-
sition footbed, and release tab so that rod rests in one of
three slots provided.
Figure 44
