16
“Xplore Your World!”
Always make sure that a properly attached
seat belt is secured on the child at all times.
WARNING: Positioning belts should never be used for securement in motor ve-
hicles. The chair does not ship equipped with a WD-19 compliant belt. An addi-
tional WC-19 compliant automotive type seat belt is required when the chair is
used in vehicles.
Figure 16
Figure 17
Figure 18
1. To attach seat
belt, insert provided
bolt through
washer, seat belt,
and chair as indi-
cated in (fig 18).
Tighten securely.
Please note where left and right side attachment points
are for 2 pt., 4 pt. and trunk support
2 Point attachment location
Additional
position for
4 point belt.
Seat Belt
Chest Harness
Strap
E. SEAT BELT ATTACHMENT (2 & 4 Point)
F.
RESPOND™ CX SEAT BACK ATTACHMENT
Figure 20
Figure 21
Figure 22
1. Align bolt to holes in seat back plate, seat
back fabric and cross tube (fig. 20).
2. Push bolt through, then thread nut onto bolt on
other side of the cross tube (fig. 21). Tighten
screw.
3. Repeat steps 1 and 2 for second mounting
point on seat back.
NOTE:
It is easier to attach RESPOND™ seat
back if headrest is rotated out of the way. See
section
V.L
for directions on how to do this.
G
.
RESPOND CX SEAT DEPTH ADJUSTMENT
1. Look under the seat bottom and
locate the knob (figure 23).
Loosen the knob and loosen the
tensioning straps. (see fig. 32).
2. Reposition the seat base to the
desired seat depth and retighten
the knob first and the tensioning
straps second. See Section H.
below for reference to seat
cushion attachment.
Figure 26
Figure 23
Figure 25
Figure 24
Figure 19