63
SIP Operation Manual
Enable: Tick the check box to enable detection of this entry.
Scan Code: Defines the digits for the gateway to scan while user is dialing.
VoIP Dial-out: Defines the dialed number rule for the gateway to call through Internet.
PSTN Dial-out: Defines the dialed number rule for the gateway to call through PSTN.
User Dial Length: Defines total number of digits that user dialed. A setting of zero tells the
gateway scans digits only and disregards the total digit count.
Route: Determine the interface calls should go through if above conditions satisfied.
Methods of Digit Map:
Method 1- Single mapping: Fill a short code into the
Scan Code
column, and enter the desired
phone number into the
VoIP Dial-out
or
PSTN Dial-out
column.
Example - Single mapping,
Scan Code: 55
VoIP Dial-out: 07021234567
User Dial Length: 2
Route: VoIP
Pick up the handset and dial 55 and the gateway will dial 07021234567. You also can use Digit
Map Testing to know that the gateway will dial 07021234567 and go through Internet.
