2
SIP Operation Manual
Hardware Description
2 ports gateway model: 2S / 2O / 1S1O
Front Panel
Power Indicator: Green light indicates a normal power supply.
Run Indicator: Blinking green light indicates normal operation.
Alarm Indicator: When the system starts up, the red light will blink. It also indicates the
gateway’s abnormal operation.
Voice ports indicators: Indicate connection and activity on the port 1 – 2.
WAN stands for the WAN Port Indicator.
L1 – L4 stands for the LAN Port Indicator.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40
seconds, the Alarm indicator will go off, the Run indicator will blink green, and the Power
indicator will stay green (under normal operating conditions). If the Alarm indicator continues
to blink, then the system is attempting to connect with your ISP and has yet to obtain an IP
address.
Once the WAN is connected, the WAN indicator will light up green and, if data is being
transmitted over the Internet, the indicator blinks green and orange.
To restore factory default settings (IP address, User’s Name, Password):
(1) Disconnect the power plug.
(2) Press and hold the reset button.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
L4 L3 L2 L1 WAN
WAN, LAN indicators
Status indicators
Voice ports indicators
VoIP Gateway
P2 P1
Alarm RUN Power
