23
SIP Operation Manual
IP Configuration Settings of WAN Port
Static IP Settings
NOTE: Complete static IP settings should include a static IP (option 1 under 114), IP address (111),
Subnet Mask (112), and Default Gateway (113). Please contact your local Internet Service Provider (ISP)
if you have any questions.
Function Command
Select a Static IP
After entering IVR mode, dial 114.
After hearing “Enter value”, dial 1 (to select static IP)
IP address Settings
After entering IVR mode, dial 111. After hearing “Enter value”, enter your
IP address, followed by “#”.
Example:
If the IP address is 192.168.1.200, dial 192*168*1*200#.
Subnet Mask Settings
After entering IVR mode, dial 112. After hearing “Enter value”, enter your
subnet mask, followed by “#”.
Example:
If the mask value is 255.255.255.0, dial 255*255*255*0#.
Default Gateway
Settings
After entering IVR mode, dial 113. After hearing “Enter value”, enter your
default gateway’s IP address, followed by “#”.
Example:
If the default gateway is 192.168.1.254, dial 192*168*1*254#.
Save Settings and
Restart
To save settings, dial 509 (Save Settings). The gateway will save the
current settings. After hearing “one”, dial 118 to restart the gateway. Wait
for about 40 seconds for the gateway to restart, and then enter 101 to
check whether or not the IP address is retained. If the IP address is not
repeated, this indicates that the gateway is not properly connected.
Please check to be certain that the cable connection, account, and
password are all correct.
Dynamic IP (DHCP) Settings
After entering IVR mode, dial
114
.
You will hear “Enter value”, Dial 2 to select DHCP.
Dial 509 to save settings.
Dial 118 to reboot the gateway.
Wait for about 40 seconds for restart, and then enter
101
to check whether or not the IP
address is retained.
