10
SIP Operation Manual
Model Description
8S:
P1-P8 stand for Phone1-Phone8. Connect to your analog telephone.
8O:
P1-P8 stand for Line1-Line8. Connect to your original telephone line on the wall jack with
RJ-11 cable.
6S2O:
P1-P6 stand for Phone1-Phone6 and P7-P8 stand for Line1-Line2. Phone ports are connected
to your analog telephone, and Line ports are connected to your original telephone line on the wall jack
with RJ-11 cable. P1 will be relayed to P7, and P2 is relayed to P8 to reach PSTN before the power is
connected or in the occasion of a power failure.
4S4O:
P1-P4 stand for Phone1-Phone4 and P5-P8 stand for Line5-Line8. Phone ports are connected
to your analog telephone, and Line ports are connected to your original telephone line on the wall jack
with RJ-11 cable. Each FXS is relayed to each FXO symmetrically before the power is connected or in
the occasion of a power failure.
WARNING:
DO NOT
(1) connect the phone ports to each other (FXS to FXS) or (2) connect any
phone port directly to a PSTN line (FXS to PSTN) or to an internal PBX line (FXS to PBX
extension). Doing so may damage your VoIP gateway.
Rear Panel
8S Model (8 FXS ports)
POWER
Connects to the power
Adapter (comes with
the gateway)
P1
WAN
L1
FXS ports 1 ~ 8
(telephone connectors)
Connects to phone sets
WAN port
Connects to broadband
Networks such as ADSL,
Cable Modem or Router
LAN ports 1 ~ 4
(built-in Ethernet switch)
Connect LAN hosts here
to share WAN connection.
IP sharing features enabled
RESET
To reset the
gateway
Or to restore
factory settings
P2
P3
P4
L2 L3
L4
P5
P6
P7 P8
RESET
GND
DC12V
