10
E
n
g
lish
FIRST STEPS
Installation
Make sure that the device is switched off and disconnected from the mains during installation. Only
when all connections have been made, switch on the device via the mains switch.
Power Supply
Use only the supplied AC adapter to power and charge the TV. Observe the information on the rating
plate of the power supply unit.
Notes:
The power supply provides a stabilized DC voltage. Operating with an unstabilized voltage
can damage the device. Only the included power supply ensures safe operation and compli-
ance with all regulations and standards.
It is possible to use the TV with the power adapter connected. The device will simultaneously
charge the built-in battery during use.
Connect to the Antenna
The TV receiver is suitable for digital free-to-air TV (DVB-T / T2). Connect the cable of your antenna
system or the antenna supplied with the antenna input (TV) of the device. In order to activate the
integrated amplification of the supplied antenna, you must activate the 5V supply voltage for the an-
tenna input (page 17)
With the device you can only receive free-to-air DVB-T / T2 channels.
PayTV transmitter and transmitter of the multithek (HbbTV) are not decodable with the device!
Headphone
You can connect a headphone or an external hi-fi system at the headphone output (adapter cable
required). When using the connection, the internal loudspeakers of the device are switched off auto-
matically.
Analog Audio / Video Input
The device has an analog audio / video input to use external devices such as DVD players or video
cameras on the device. Use the supplied AV adapter cable to connect to external devices. After con-
necting, use the SOURCE button and select the "AV" source to switch to the audio / video input.
USB port / MicroSD
The device has a USB 2.0 port, as well as a MicroSD card slot for the integrated recording function or
the media player. Please refer to the notes on page 6 of this manual. You can reach the USB media
player by pressing the
USB
button on the remote control or by pressing the
SOURCE
button and
selecting "USB". You can access the MicroSD media player by pressing the
SOURCE
button and
selecting "MicroSD".
