XONTEL XT-25G, User Manual

Page: 160 / 166

Upgrade
To upgrade via HTTP,
the “Management”-> “auto provision” -> “Firmware Upgrade”-> “Upgrade Mode”
field needs to be set to HTTP, respectively.
“Firmware Server Path” needs to be set to a valid URL of a
HTTP server, server name can be in either FQDN or IP address format. Here are examples of some
valid URL.
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or
use Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root /fm directory of the HTTP server.
(3) Visiting
“http://192.168.0.254/fm/fw920M.rom on localhost by browser” to verify the HTTP Server.
If
visiting “http://192.168.0.254/fm/fw920M.rom on another computer and it not prompted to download
fw920M.rom file on this computer, please check if the firewall is on or off (Suggest you turn off the
firewall).
To configure the server path via Web interface:
1.
Click Management→Auto provision:
2. Select the upgrade mode in the Upgrade Mode field
3. Enter the Firmware Server Path and Config Server Path (192.168.0.254 is HTTP server).
4.
Enter the HTTP server’s username and password (optional).
5. Click the button to save the configuration.
6. Restart the XT-25G, IP Phone will restart and auto-get firmware files from HTTP server.