Note:
The priorities of listening to multicasting addresses can be predefined: 1 being the
highest priority, 10 with the lowest in priority order. Both the multicast paging sender
and
receiver’s phones play a warning tone when establishing a multicast paging call.
Listening to Multicasting addresses can be configurable via Web interface only.
To configure multicast listening addresses via Web interface:
1.
Click Directory->Multicast Paging
。
2.
Select the desired value from the pull-down list of Paging Barge.
3.
Select the desired value from the pull-down list of Paging Priority Active.
4.
Enter the multicast IP address/addresses and port number (e.g., 224.5.6.20:2000) which the
phone listens to for incoming RTP multicast in the Listening Address field.
5.
Enter the label in the Label field.
6.
Click
button to save the configuration.
Summary of Contents for XT-25G
