Xinje ZG3 Series User Manual Download Page 4

Page: 4 / 93

Preface

Thank you for purchasing XINJE ZG3 series integral industrial controller, please read the manual

before operating.

This manual applies to the ZG3 series integral industrial controller.

XINJE provides user with press document and tele-document:



User CD

Contained software, manual and application examples



XINJE website

Welcome to www.XINJE.com to download center to find

electronic document.

If you have any questions, please contact us.

Tel: 86-0510-85134136

Fax: 86-0510-85111290

Address: 4

Floor, Building 7, Originality Industrial Park, Liyuan

Development Zone, Wuxi City, Jiangsu province, China

Manual purpose



This manual provides user with the guide of using and operating our product, it

includes the product characteristics, spec explanation, using method, etc.



This manual contains product summarization, exterior layout, PLC program,

and HMI editing. The details please refer to XD series PLC manual and TG series

HMI manual.



Summarization: introduce the product characteristics, specs, dimension,

installation.



Exterior layout: introduce the product power spec, in-out layout.



PLC program: introduce how to program in PLC.



HMI picture: introduce how to edit picture in TG.



Exterior extension: introduce extension ability of the product.

Suitable people

This manual aims to below users:



Terminal user



Debugging person



Technology support person

Make sure you have read the safety notice before operating.

Scope

Tele-document

Summary of Contents for ZG3 Series






























































































Search results

Summary of Contents for ZG3 Series

Reviews:

Related manuals for ZG3 Series

Brands by name

Popular brands

Xinje ZG3 Series, User Manual

Search results

Summary of Contents for ZG3 Series

Reviews:

Related manuals for ZG3 Series

Brands by name

Popular brands