1
►► Safety notes
Confirmation
Do not use the drivers that are broken, lack of parts or wrong types.
Installation
Make sure all the external powers are cut off before install the drivers.
Wiring
Please cut off all the powers before wiring.
Connect the AC power to the power terminals of driver.
Do not connect U, V, W terminals of driver with 3-phase power supply.
Please use 2mm
2
cable to ground the GND terminal of driver.
Maintenance and running
Install the panel cover when power on.
Do not touch the terminals in 5 minutes after power off.
Do not connect motor with load when test running.
Set the suitable power consumption parameters before connecting the
machine.
Do not change the wiring with electricity.
Do not touch the radiator when running.
►► Confirmation after getting the products
1. Please confirm the following items after getting the products.
Item
Contents
The type is what you ordered?
Check the label of driver and motor
Does the motor shaft rotate well?
Can rotate by manual. Cannot rotate by manual
for brake types
Is there any damage?
Check if the cover has damage during
transporting
Is the screw loose?
Check the screw with screwdriver
Check the motor code
Check if the driver and the motor code is
