Xilinx ZCU1285, User Manual

Page: 77 / 85

Note: The Button Functionality options apply to all buttons in the System Controller pane, not just the
Power tab. Be sure to switch back to Run Once when using other tabs in the SCUI.
Figure 41: Read Power Rails Continuously
FMC Tab
The ZCU1285 board provides two FPGA mezzanine card (FMC) ANSI/VITA 57.1 expansion
interfaces, JA3 and JA4 (callout 53 and 54,
Figure 2: Board Component Locations ). The following
table shows the FMC cards supported by the System Controller and the programmable clock
resources on each card.
Table 31: FMC Card Clock Sources
Xilinx FMC Card Description Clock Source #1 Clock Source #2
XM101 LVDS QSE card Si570 SI570
XM104 Serial transceiver
connectivity card
Si570 Si5368
XM105 Debug card Si570 N/A
XM107 Loopback card Si570 N/A
Notes:
1.
These FMC cards are not included in the ZCU1285 kit.
The FMC tab has options for viewing FMC card EEPROM data, changing the VADJ voltage for
each FMC interface, and programming clock sources (see the following figure).
Figure 42: FMC Tab
Appendix E: System Controller
UG1348 (v1.0) July 16, 2019 www.xilinx.com
ZCU1285 Board User Guide 77
Send Feedback