Xilinx ZCU1285, User Manual

Page: 25 / 85

Table 9: User LEDs
RFSoC (U1)
Schematic Net
Name
Reference
Designator
Pin Function Direction IOSTANDARD
AM25 USER LED Output LVCMOS18 APP_LED1 DS26
AL24 USER LED Output LVCMOS18 APP_LED2 DS22
AK22 USER LED Output LVCMOS18 APP_LED3 DS23
AJ22 USER LED Output LVCMOS18 APP_LED4 DS24
AN25 USER LED Output LVCMOS18 APP_LED5 DS25
AN24 USER LED Output LVCMOS18 APP_LED6 DS46
AM23 USER LED Output LVCMOS18 APP_LED7 DS47
AL23 USER LED Output LVCMOS18 APP_LED8 DS48
User DIP Switches and I/O Header
The DIP switch SW3 (callout 43, Figure 2: Board Component Locations ) provides a set of eight
active-High switches that connect to user I/O pins on the RFSoC as shown in the following table.
Use these pins to set control pins or for any other purpose. The eight I/Os also map to test
header J95 (callout 43,
Figure 2: Board Component Locations ), providing external access for
these pins. The I/O pins can be connected to the onboard System Controller as additional GPIO
between the two devices.
Note: Install J7 to connect the user DIP switches to the System Controller.
Table 10: User DIP Switches
RFSoC (U1)
Schematic
Net Name
DIP Switch
Reference
Designator
J95 Test
Header Pin
Device
(U38) Pin
Pin Function Direction IOStandard
AV25 User Switch Input LVCMOS18 USER_SW1
SW3
1 F12
AU25 User Switch Input LVCMOS18 USER_SW2 3 E13
AV23 User Switch Input LVCMOS18 USER_SW3 5 E11
AU23 User Switch Input LVCMOS18 USER_SW4 7 E12
AW24 User Switch Input LVCMOS18 USER_SW5 9 F13
AV24 User Switch Input LVCMOS18 USER_SW6 11 F14
BA22 User Switch Input LVCMOS18 USER_SW7 13 G15
AY22 User Switch Input LVCMOS18 USER_SW8 15 F15
The following figure shows the user I/O connector J95 (callout 43, Figure 2: Board Component
Locations ).
Chapter 1: ZCU1285 Board Features and Operation
UG1348 (v1.0) July 16, 2019 www.xilinx.com
ZCU1285 Board User Guide 25
Send Feedback