18
Brush Cover
Clip
Brush
Brush Bearings
Note:
It is recommended to replace the brush every 6–12 months for optimal cleaning
performance.
CAUTION:
If too much hair is tangled in the brush, or if the hair is tightly tangled, do
not forcibly pull on it, as this could damage the brush.
Brush
1. Flip the robot vacuum over and pinch the clips to remove the brush cover.
2. Lift the brush out of the robot vacuum, then clean the brush bearings.
3. Use the included cleaning tool to cut any tangled hairs on the brush, and
remove the hairs and other debris from the brush.
4. Reinstall the brush and the brush cover, and ensure they are securely in
place.
Note:
It is recommended to replace the side brush every 3–6 months for optimal
cleaning performance.
Omnidirectional Wheel
1. Flip the robot vacuum over and pull out the omnidirectional wheel.
2. Remove hair, dirt, and other debris from the wheel and axle.
3. Reinsert the wheel and press it firmly back into place.
Wheel
Axle
·
A small screwdriver or other pry tool can be used to gently pop out and remove the
wheel.
·
The wheel can be cleaned with water and reinstalled after drying.
Notes:
Side Brush
1. Flip the robot vacuum over and remove the side brush upwards to clean it.
2. Reinstall the side brush to the robot vacuum.
