17
1. Remove the dirty water tank, open its cover and pour out the dirty water.
2. Wash the tank with clean water, then reinstall it to the omni station.
Dirty Water Tank
Use a soft cloth to clean all sensors and chraging contacts in the robot
vacuum:
· The cliff sensors and the ultrasonic sensor on the bottom of the robot
vacuum
· The charging contacts on the back of the robot vacuum
· The edge sensor on the side of the robot vacuum
· The LDS laser sensor on the top of the robot vacuum
· The bumper, the AI visual recognition sensor, and the line laser sensors
on the front of the robot vacuum
Sensors and Charging Contacts
Line Laser Sensor
AI Visual Recognition Sensor
Cliff Sensor
LDS Laser Sensor
Ultrasonic Sensor
Charging Contacts
Edge Sensor
Bumper
Note:
The float ball in the dirty water tank is a movable part. Do not apply too much
force when cleaning it to avoid damaging it.
