17
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
The CN3200 Modem is a 2x4 MIMO device with four antenna connectors — two Tx/Rx and two
Rx-only.
All connectors are always used.
Omni, Panel and Sector antenna configurations are supported.
For optimum performance, the CN3200 Modem should be placed as close as possible to the
antennas.
The antenna cable lengths should be as short as possible.
The GPS antenna can be mounted in any convenient location.
FOR OPTIMUM PERFORMANCE
The cables from the two Tx/Rx connectors on the CN3200 Modem should be connected
to the two antennas on one diagonal.
The cables from the two Rx connectors on the CN3200 Modem should be connected
to the two antennas on the opposite diagonal.
IMPORTANT
UV-resistant CMX outdoor-rated, Cat 5e UTP Ethernet cable
MUST
be used.
Foil-shielded cable is recommended in areas requiring protection from EMI, RFI, or cross talk.
Failure to properly install the provided IP68-rated Weatherproof Ethernet Power Connector
may lead to product failure, and void the product warranty.
For additional information, please refer to the
Antenna Configuration
illustration on page 18.