19
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
NOTE
xG Technology recommends that the CN3200 Dual Band Routing Modem be configured on a bench
before installing the device in the field. Please refer to the topic
Configuring the CN3200 Dual Band
Routing Modem
on page 13.
This checklist may assist you in assembling the parts needed to complete the installation.
CN3200 Dual Band Routing Modem
SUPPLIED BY xG Technology
OBTAIN FROM YOUR PART SUPPLIER
CN3200 Modem
with Wall Mount Bracket
UV-resistant CMX outdoor-rated,
Cat 5e UTP Ethernet Cables
(4-6 mm OD; lengths as required)
Weatherproof Ethernet Kit
Data Cable Connectors (RJ45)
PoE++ Power Supply
Grounded PoE Surge Protector
(CTC Union SP-POE-01 or equivalent)
900 MHz Panel Antenna
and 4 Cables (SMA-Female)
2.4 GHz Panel Antenna
and Cable (TNC-Female)
Ferrite Beads
Alternative mounting solution
(as ordered)
Figure 2 — CN3200 Dual Band Routing Modem Parts Checklist
IMPORTANT
The provided weatherproof Ethernet connector requires the use of Ethernet cables with an outside
diameter of 4-6 mm.