![background image](http://html2.mh-extra.com/html/xg-technology/cn3200/cn3200_installation-and-configuration-manual_3316139014.webp)
14
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
1.
Use a laptop or desktop computer to configure the CN3200 Modem.
Ensure that the computer network adapter is configured to
Obtain an IP address automatically
,
and
if DNS servers are static, change the setting to
Obtain DNS server addresses automatically
.
2.
Using an Ethernet cable, connect the computer to the Ethernet connector on the CN3200 Modem.
3.
Connect the power cable on the PoE++ Power Supply to a 110 to 240 VAC power source.
The Status LED
glows
RED
within fifteen seconds after the power source is switched on.
NOTE
The CN3200 Modem start up process takes approximately two minutes.
Before continuing, wait until this process completes and the LED glows
GREEN
.
1.
On the computer, open a Web browser.
2.
In the browser address line, enter the
IP address to open the
CN3200 Modem management
window:
CN3200 Modem xMax Network Management
xMax Network IP Address:
https:// 192.168.88.1:8081
3.
In the
User name
and
Password
fields enter:
User name:
admin
Password:
admin1
The password is case sensitive.
The CN3200 Modem Management window opens to the
Status
page.
xG Technology strongly recommends that you change the User Password.
4.
The menu bar is at the top of the window. To change the
User Password
, on the right side of the
menu bar, click
Admin
.
NOTES
The
Password
is case sensitive.
Before clicking
Enter
, be sure to write down the new password for future reference:
New Password: