![background image](http://html2.mh-extra.com/html/xg-technology/cn3200/cn3200_installation-and-configuration-manual_3316139034.webp)
34
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
IMPORTANT
Before you begin this step, it is assumed that the CN3200 Dual Band Routing Modem has been
configured as described in the steps shown in the topic
Configuring the CN3200 Dual Band Routing
Modem
on page 13.
These steps connect the CN3200 Modem to an xMax network.
Connect the power cable on the PoE++ Power Supply to a 110 to 240 VAC power source.
Within 15 seconds after the power source is applied, the
Status LED
glows
RED
.
If the CN3200 Modem is within range of an xMax Network, it connects within 2 minutes and the LED
glows
GREEN
.
The CN3200 Dual Band Routing Modem is now fully functional.
NOTES
If the
Status LED
remains
RED
after two minutes have elapsed,
ensure that the CN3200 Modem is within range of an operating xMax Network.
If the CN3200 Modem is within range of an operating xMax Network, but not connecting,
follow these steps to restart the CN3200 Modem:
Power off the CN3200 Modem.
Wait 60 seconds.
Power on the CN3200 Modem.