10
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
These notices apply to the CN3200 Dual Band Routing Modem.
Be sure to read, understand and follow these instructions.
Heed all warnings.
Only use accessories and attachments specified by xG Technology.
Keep a copy of these instructions for future reference.
FCC Part 15 Requirement
The CN3200 Dual Band Routing Modem MUST only be installed by a professional installer. It is the
responsibility of the installer to adjust the transmit power level to ensure that the output power
plus antenna gain does not cause the device to exceed FCC Part 15 output power regulations.
Shielded and grounded Ethernet
MUST
be used to avoid damage to the CN3200 Modem unit
and ensure proper operation.
Lightning Protection
MUST
be used on all antenna connections and Ethernet tower runs.
Hazardous situation, which if not avoided,
could result in death or serious injury.
All antennas
MUST
either be located on the exterior of a vehicle or mounted on a pole.
Every antenna
MUST
be separated from users by more than 23 cm (0.75 ft) at all times.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of
23 cm (0.75 ft) between the radiator and your body. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Changes or modifications to this device
not expressly approved by xG Technology
could void the user’s authority to operate the equipment
and void the product warranty.