Maintenance
128
Phaser 6600 Color Printer
User Guide
7. Repeat the process for the right side calibration lines, RY, RM, and RC.
8. Align a straight edge through the middle of the white zone in each of the PY, PM, and PC charts.
Circle the number at the end of each chart that represents the middle of the white zone.
9. Navigate to
Enter Number
.
10. To enter values for each LY, LM, and LC field, use the
Up
and
Down
arrow buttons. Adjust the
value to what you circled for each field, then press
OK
.
11. Repeat step 9 to enter values for each RY, RM, and RC field, and each PY, PM, and PC fields.
12. Print another Registration Chart, then repeat the process until you complete the color
registration corrections.
Checking the Firmware Version
1. At the printer control panel, press the
Menu
button.
Note:
To navigate through the menu, use the
Up
or
Down
arrow buttons.
2. Navigate to
Admin Settings
, then press
OK
.
3. Navigate to
Service Tools
, then press
OK
.
4. Navigate to
F/W Version
, then press
OK
.
The firmware version appears in the bottom line of the display.
5. To return to Service Tools, press the
Back
arrow button, or to return to the main menu, press the
Menu
button.
Adjusting Paper Type
Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
To adjust the paper type:
Summary of Contents for Xerox Phaser 6600
