Xerox WorkCentre M24 Color, User Manual

Page: 381 / 441

4–47
U
S E R
G
U I D E
(M
A C H I N E
A
D M I N I S T R A T O R
)
Others (Print Mode Settings)
In Others, several printer-related settings can be set.
Print Area Set whether or not to extend the printing area. The default is
Normal.
Substitute Tray Set whether or not to switch to paper in a different tray when the
tray that was selected in Auto Tray Switching runs out of paper. To
substitute other paper, the size of the paper must be specified.
• Display Message - Displays the message to add more paper
without substituting other paper.
• Use Larger Size - Substitutes with paper of the next size of
paper larger than the currently selected size. The image will be
printed at 100% magnification.
• Use Nearest Size - Substitutes with paper nearest to the
currently selected size, and prints on that paper. The image
will be automatically reduced if it is necessary.
The default is Display Message.
NOTE: If the paper size is specified by the client, the client setting
is given priority.
Banner Sheet Set whether or not to output copies with a banner sheet attached.
• Start Sheet - Banner sheet is printed before the job.
• End Sheet - Banner sheet is printed after the print job.
• Start Sheet + End Sheet - Banner sheets are printed before
and after the print job.
The default is Start Sheet.
NOTE: Banner sheets are not output if stapling is set. Banner
sheets are added to meters when they are printed.
Banner Sheet Tray Select the tray to be used for the banner sheets. Trays 1 - 5
(Bypass) can be selected. The default is Tray 1. The banner sheet
will be printed on whatever paper size is loaded in the selected
tray.