Xerox WorkCentre M24 Color, User Manual, Page: 339 / 441

4–5
U
S E R
G
U I D E
(M
A C H I N E
A
D M I N I S T R A T O R
)
Entering and Exiting the System Settings Mode
This section explains how to enter and exit System Settings Mode.
Entering the System Settings Mode
This section explains how to enter the System Settings Mode.
NOTE: The machine will not enter the System Settings Mode
when an error message is displayed.
1
Press the Access button. The Enter Password screen is
displayed. The default password is 11111.
2
Enter the password and select Confirm . The machine enters
System Settings Mode, and the System Administrator Menu
screen is displayed.
NOTE: Your password will be displayed by an asterisk (*). If you
make a mistake, press the Clear button and re-enter the
password.
If you want to cancel the operation, select Cancel .
3
Select either User Mode or System Settings .
• User Mode - make copies and scan documents in the System
Settings Mode. If you select Machine Status or Job Status
while in the System Settings Mode, printer and copier total
reports can be printed.
• System Settings - you can change the settings of features.