Xerox WorkCentre M24 Color, User Manual

Page: 373 / 441

4–39
U
S E R
G
U I D E
(M
A C H I N E
A
D M I N I S T R A T O R
)
Copy Control
This is the setting for Copy Control.
The following items can be set in Copy Control.
Auto Paper Off Set which tray will be selected when Auto % or Independent X-Y
Auto is selected in Reduce/Enlarge when Auto is selected in
Paper Supply, on the
Basic Copying screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 1, Select Tray 1.
Memory Full Procedure Set the processing method when the hard disk runs out of memory
during a job.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Disable.
Maximum Stored Pages This determines the maximum number of stored pages when
copying documents. It can be set from 1 to 999 pages.
Enter the number of the pages using the numeric keypad on the
Control Panel. The default is 999.
Setting Description
1 Select Tray 1
2 Select Tray 2
3 Select Tray 3
4 Select Tray 4
Setting Description
0 Disable (Discard stored
documents)
1 Enables stored data