Xerox WorkCentre 5945, Quick Start Manual

Page: 64 / 69

Getting Started WorkCentre
®
XXXX
User Guide 61
Cleaning the Document Glass and Constant Velocity Transport
Glass
To ensure optimum print quality at all times, regularly clean the glass areas of your device. This
helps avoid output with streaks, smears and other marks that may transfer from the glass area
when scanning documents.
When you use the document feeder, your documents will pass over the stationary scanner using the
Constant Velocity Transport glass. Any dirt or marks on this piece of glass will cause lines or streaks
on your copies, faxes or scanned images. Also, any marks or dirt on the Constant Velocity Transport
roll may show through the document and appear on your scanned images.
1. Use a lint-free cloth, lightly dampened with Xerox Anti-Static or general cleaning fluid (or
another suitable non-abrasive glass cleaner) to clean the document glass and the Constant
Velocity Transport glass (the narrow strip of glass to the left of the main document glass).
2. Wipe away any residue with a clean cloth or paper towel.
3. Use a lint-free cloth, lightly dampened with water, Xerox cleaning fluid or Xerox film remover to
clean the under side of the document cover or document feeder and the complete
circumference of the Constant Velocity Transport roll.
!
WARNING
When cleaning the device do NOT use organic or strong chemical solvents or aerosol cleaners. Do
NOT pour fluids directly onto any area. Use supplies and cleaning materials only as directed in this
documentation. Keep all cleaning materials out of the reach of children.
!
WARNING
Do not use pressurized air-spray cleaning aids on or in this equipment. Some pressurized air-spray
containers contain explosive mixtures and are not suitable for use in electrical applications. Use of
such cleaners can result in a risk of explosion and fire.
Cleaning the Control Panel, Touch Screen, Document Feeder and
Output Trays
Regular cleaning keeps the touch screen, control panel and other device areas free from dust and
dirt.
1. Use a soft, lint-free cloth, lightly dampened with water.
2. Wipe clean the entire area of the control panel, including the touch screen.
3. Wipe clean the document feeder, output trays, paper trays and other outside areas of your
device.
4. Remove any residue with a clean cloth or paper towel.
Clearing Paper Jams
When a paper jam occurs, a fault screen is displayed which provides recovery instructions. Follow
these instructions to clear the fault.