Xerox WorkCentre 5945, Quick Start Manual

Page: 63 / 69

Getting Started WorkCentre
®
XXXX
60 User Guide
If a job is held in the list, it may require additional resources or a secure code to print. The reason
for the held status is displayed on the Job Progress screen. Once the requirement has been met or
the correct secure code entered, the job is released for printing.
To enhance productivity your System Administrator can change the default settings for many of the
features to the settings most commonly used in your work group. For example, your System
Administrator could increase the default darkness of copies if you regularly copy lightly marked
documents such as pencil drawings.
Refer to the System Administrator Guide for further information.
Maintenance and Consumables
Identifying the Replaceable Units
There are several consumables on the device that need replenishing or replacing, such as paper,
staples, and customer replaceable units.
1. Toner Cartridge
2. Print Cartridge
The device will display a message on the touch screen when any of the units need to be re-ordered.
This message is a warning that the unit is nearing the end of its life. Only replace the unit when a
message actually instructs you to do so.
!
WARNING
When replacing consumables do NOT remove the covers or guards that are fastened with screws.
You cannot maintain or service any of the parts that are behind these covers and guards. Do NOT
attempt any maintenance procedure that is NOT specifically described in the documentation sup-
plied with your device.