Xerox WorkCentre 5790 Family, Service Manual

Page: 102 / 143

May 2013
5-101 Xerox® WorkCentre® 5790 Family
PL 11.153
Parts Lists
PL 11.153 HVF Feed Assembly and
Punch (1 of 3)
Item Part Description
1 604K54740 HVF 2 hole punch assembly (XE)
– – HVF 3 hole punch assembly (Not
Spared) (USSG/XCL)
2 604K83750 HVF chad bin
3 – Hole punch thumb screw (P/O PL
11.153 Item 1)
4 059K59551 Hole punch blanking assembly
5 868E05770 Front tamper arm (W/O TAG V-006)
– – Front tamper arm (reinforced) (P/O
PL 11.140 Item 22) (W/TAG V-006)
6 127K56600 Front tamper motor assembly (REP
11.11-171)
7 038E40870 Diverter exit gate
8 059K59560 Upper exit guide (5c)
9 – BM diverter gate (P/O PL 31.14
Item 11) (W/TAG V-008) (REP
11.39-171)
10 059K59531 Buffer pocket jam clearance guide
11 059K59540 Inserter jam clearance guide
assembly (8a)
12 059K59521 Input jam clearance guide (5a)
13 059K59510 Buffer guide assembly (5b)
14 – Nip split motor cover (P/O PL
11.153 Item 13)
15 – Nip split motor (MOT11-081) (P/O
PL 11.153 Item 13)
16 121K45300 Magnet
17 130E12810 Paper edge sensor (NOTE)
18 130E12840 Chad bin present sensor (Q11-112)
19 – Hole punch unit (see below for
variants)
– – 2 Hole (P/O PL 31.10 Item 5) (XE)
– – 2 Hole Legal (P/O PL 31.10 Item 5)
– – 3 Hole (P/O PL 31.10 Item 5)
(USSG/XCL)
– – 4 Hole (P/O PL 31.10 Item 5) (XE)
– – 4 Hole (Sweden) (P/O PL 31.10
Item 5)
20 130E10380 Chad bin level sensor (Q11-348)
NOTE: There is no component control code for the paper
edge sensor
www
MK-Electronic
de