Xerox WorkCentre 5790 Family, Service Manual

Page: 40 / 143

May 2013
5-39 Xerox® WorkCentre® 5790 Family
PL 8.15
Parts Lists
PL 8.15 Registration Transport (35-55
ppm)
Item Part Description
1 – Registration transport assembly
(Not Spared) (REP 8.4, ADJ 8.1)
2 – Retainer bracket (Not Spared)
3 130E11430 Wait sensor (Q08-100),
Registration sensor (Q08-150)
(NOTE 2) (REP 8.6)
4 – Registration transport guide (P/O
PL 8.15 Item 1)
5 059K52341 Registration nip assembly
6 028E16630 Snap on washer (M6)
7 – Registration clutch (CL08-070) (P/
O PL 31.12 Item 13) (REP 8.5, ADJ
8.1, ADJ 4.1)
8 013E36980 Bearing
9 806E18030 Drive roll assembly (REP 8.26)
10 – Jam clearance knob (P/O PL 8.15
Item 1)
11 – Gear (26T) (P/O PL 8.15 Item 1)
12 – Spring arm (P/O PL 8.15 Item 1)
13 – Torsion spring (P/O PL 8.15 Item 1)
14 – Gear (28T) (P/O PL 8.15 Item 1)
15 – Ring pitch (P/O PL 8.15 Item 1)
16 – Black nylon washer (P/O PL 8.15
Item 1)
17 – Gear (22G/28T) (P/O PL 8.15 Item
1) (ADJ 4.1)
18 – Gear (23T) (P/O PL 8.15 Item 1)
(ADJ 4.1)
19 – Gear (22G/20T) (P/O PL 8.15 Item
1)
20 – Drive belt (P/O PL 8.15 Item 1)
(REP 8.27)
21 – Spring arm pin (P/O PL 8.15 Item 1)
22 – Lower bias guide (P/O PL 8.15 Item
1)
23 835E05350 Bias contact (NOTE 1)
24 – Clutch cover (P/O PL 31.12 Item
13)
25 – Drive shaft (P/O PL 8.15 Item 26)
26 604K55570 Drive roll repair kit (W/TAG 051)
NOTE: 1. This is a HFSI. Refer to GP 17 and reset the bias
foam count to zero in the feature screen.
NOTE: 2. Sensor reference Q08-110 may also be seen when
the tray 5 is present.
www
MK-Electronic
de