Xerox WorkCentre 5790 Family, Service Manual

Page: 15 / 143

May 2013
5-14 Xerox® WorkCentre® 5790 Family
PL 5.17
Parts Lists
PL 5.17 Feed Assembly (40-90 ppm)
Item Part Description
1 113R00718 Feed roll assembly (See NOTE 1)
(REP 5.14)
2 130E11200 Feed sensor (Q05-330)
3 – Front cover (P/O PL 5.17 Item 18)
4 – Feed housing (P/O PL 5.17 Item
18)
5 127K75140 Nudger motor (MOT05-010)
6 – Feed yoke (P/O PL 5.17 Item 28)
7 – Spring (P/O PL 5.17 Item 18)
8 – Bearing (P/O PL 5.17 Item 18)
9 005K12600 Feed clutch (CL05-025) (W/O TAG
D-005)
– – Feed clutch (P/O PL 5.17 Item 30)
(W/TAG D-005)
10 – Rear cover (P/O PL 5.17 Item 18)
11 110E13480 Top cover interlock switch (S05-
305)
12 – Front feed gate (P/O PL 5.17 Item
18)
13 – Rear feed gate (P/O PL 5.17 Item
18)
14 125E00430 Static eliminator
15 – Gear (P/O PL 5.17 Item 26)
16 127K53770 Feed motor (MOT05-020) (See
NOTE 2) (ADJ 5.1)
17 – Feed motor tension spring (red) (P/
O PL 5.10 Item 9)
18 – Feed assembly (complete) (REF:
PL 31.11 Item 8) (W/TAG D-002,
TAG D-006)
19 – Shaft (P/O PL 5.17 Item 26)
20 – Bracket (P/O PL 5.17 Item 18)
21 802E87730 Feed roll assembly cover
22 – Intermediate feed bearing (P/O PL
5.17 Item 26)
23 013E93370 Bearing (P/O PL 5.17 Item 26)
24 004E22560 Feed motor bracket
25 – Ground harness (P/O PL 5.17 Item
18)
26 604K42680 DADH feed bearing kit (Complete)
27 – Nudger motor bracket (P/O PL 5.17
Item 5)
28 604K54340 Lever arm CRU spares kit
29 – Shim kit (Not Spared) (W/TAG D-
003)
30 604K61440 Feed clutch and spacer kit (W/TAG
D-005)
31 – Spacer (P/O PL 5.17 Item 30)
NOTE: 1. HFSI. To reset th HFSI count, refer to GP 17.
NOTE: 2.For the feed motor drive belt, refer to PL 5.35 Item
5.
www
MK-Electronic
de