Xerox WorkCentre 5790 Family, Service Manual

Page: 31 / 143

May 2013
5-30 Xerox® WorkCentre® 5790 Family
PL 7.30
Parts Lists
PL 7.30 Bypass Tray and Left Door
Assembly
Item Part Description
1 050K67883 Bypass tray and left door assembly
(35-55 ppm) (REP 7.5)
– 050K67893 Bypass tray and left hand door
assembly (65-90 ppm) (REP 7.5)
2 – Left hand door (P/O PL 7.30 Item 1,
PL 7.30 Item 27)
3 110E19990 Left hand door interlock (S01-305)
4 121E25680 Feed solenoid (SOL08-050) (REP
8.9)
5 – Feed head assembly (P/O PL 7.30
Item 1, PL 7.30 Item 27) (REP 8.19)
6 – Feed head (P/O PL 7.30 Item 5)
7 130E12060 Bypass tray empty sensor (Q07-
335) (REP 8.23)
8 – Hinge pin (Not Spared)
9 – Spring retainer (P/O PL 7.30 Item
11)
10 809E57640 Spring drive gear
11 807E05311 Drive gear assembly (REP 8.20)
12 – Bypass tray (P/O PL 7.30 Item 1)
13 809E84190 Ground spring
14 – Feed head top cover (P/O PL 7.30
Item 5)
15 – Feed roll (P/O PL 7.30 Item 21)
(REP 8.21)
16 – Nip roll (P/O PL 7.30 Item 5)
17 – Left hand door cover (P/O PL 7.30
Item 2)
18 – Retard pad bracket (P/O PL 7.30
Item 21)
19 – Retard pad assembly (P/O PL 7.30
Item 21)
20 – Retard pad spring (P/O PL 7.30
Item 21)
21 059K39862 Feed roll and retard pad assembly
(See NOTE 2) (REP 8.22)
22 – Solenoid spring (P/O PL 7.30 Item
4)
23 003E78141 Interlock cover
24 130E12770 Tray 1 feed sensor (Q08-101), Tray
2 feed sensor (Q08-102) (65-90
ppm) (130E12130) (REP 8.24)
25 130E11610 Wait Sensor (Q08-100, Q08-110)
(65-90 ppm) (See NOTE 1) (REP
8.17)
26 – Nip roll (Not Spared)
27 – Not used
28 – Pre-reg nip roll spring (P/O PL 7.30
Item 29)
29 604K55500 Skew bypass tray spares kit (x2
spring) (W/TAG 048)
30 – Nip roller (Not Spared)
31 – Shaft (Not Spared)
32 – Lower cover (Not Spared)
33 – Front pre-nip roll spring (Not
Spared)
34 – Middle pre-nip roll spring (Not
Spared)
NOTE: 1.Refer to PL 8.15 Item 3 for the 35-55 ppm wait
sensor.
NOTE: 2.HFSI. To reset the HFSI count, refer to GP 17.
www
MK-Electronic
de