![background image](http://html2.mh-extra.com/html/xerox/workcentre-5325/workcentre-5325_administrators-manual_4257192019.webp)
Initial Setup
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
19
Enabling Services and Options
Some services and options must be enabled before they can be used. To enable these special services
and options, use either the control panel or CenterWare IS.
Enabling Services and Options at the Control Panel
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
System Settings
>
Common Service Settings
>
Maintenance
.
3.
Touch
Software Options
.
4.
Touch
Keyboard
.
5.
Type the code and touch
Save
.
Enabling Services and Options in CentreWare IS
1.
In CentreWare IS, click
Properties
>
Security
>
Feature Enablement
.
2.
Type the
Unique Function Code
.
3.
Click
Apply
.
4.
Touch
Reboot
.
Viewing Services and Options
To see which services and options are enabled or installed:
1.
At the printer control panel, press the
Machine Status
button, then touch the
Machine
Information
tab.
2.
Touch
Machine Configuration
.
Initialization USB Flash Drive
When installing your printer, a Xerox Representative initializes the printer using a USB Flash drive that
contains configuration software. After installation, the representative stores the drive in a holder inside
of Tray 1.
Summary of Contents for WorkCentre 5325
